30-03-2024
Molded-shell circuit breaker is a type of electrical protection device commonly used when the load current exceeds the capacity of miniature circuit breaker. They are also used in applications of any current rating requiring adjustable trip settings, which are not available in plug-in circuit breakers and MCBs. Molded case circuit breaker, MCCB for short, is […]
28-03-2024
Low voltage can have some effect on the electric motor, depending on the type of motor and its design. Some common effects of low voltage on electric motors are: Reduced performance: Electric motors are designed to operate at a specific voltage range, and when the voltage drops below that range, the motor may not operate […]
26-03-2024
18-03-2024
Active Harmonic Filter overview Active Harmonic Filter (AHF) is a perfect all-round solution for grid power quality problems such as harmonics (can thoroughly filter out 2nd to 50th harmonic interference), reactive power, loss 3 phase load balancer. Active harmonic filters are connected in parallel in the grid, to detect harmonics in the grid in real […]
16-03-2024
Harmonics caused by inverters can cause many problems in your facility, including circuit breakers, capacitor bank failures, motor failures, blown fuses, and damaged cable insulation. BTB products can reduce these harmonics to improve power quality and protect the motor. The “AHF” filter is an elite harmonic filter applied in the system that reduces harmonics to […]
14-03-2024
The increasing use of modern power electronics (drives, uninterruptible power supplies, etc.) generates nonlinear currents and thus loads the network with harmonics. The capacitance of the capacitor forms a resonant circuit in conjunction with the power supply transformer. Experience shows that the self-resonant frequency of this circuit is usually in the range of 250 - […]
01-02-2024
Reactive Power Compensation Capacitors play a crucial role in improving power factor, reducing energy losses, and enhancing the operational efficiency of the electrical system. The installation of these capacitors not only helps save electricity costs but also contributes to stabilizing the voltage for equipment within the system. However, capacitors are highly sensitive to factors such […]
